What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 04:17

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A fuse is a non-resetable over current circuit protector.
This device then solves the entire problem.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
Do women like men who have slept with many women?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
A circuit breaker is similar, but is resettable.
There are two important concepts here.
If you caught a shoplifter at your yard sale, how would you handle it?
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
What are your funniest "lost in translation" moments if you grew up speaking more than one language?
At least they know the answer if they wanted it.
An AC voltage/ current source, and an ac inductive load.
In schematic diagrams this is the symbol for a fuse:
Do you feel uncomfortable when you come across cross dressers?
First Sentence:
Edit 2024–10.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At one ohm, the resistor has a maximum of 1 watt power.
There are three different concepts here that are getting confused.
but this device (an Inductor) … impedes the rapid changes in the current.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Do most men prefer curvy women or skinny women?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
I post the exact comment here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why does it matter so much to atheists that God doesn't exist?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[image of Common-mode choke]
[old diagram got deleted by accident]
How do I get over a long-term relationship breakup?
One is “what exactly is in a ‘surge protector’ ? ”
But it can get overloaded, and no longer works.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but I think this circuit , shows a few more pieces.
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These devices are installed between the “hot” and “neutral” and protective ground.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This one hit behind the barn.
It also is a device that limits the change in current flow.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What is lightning?
eight
It seems Mohan does not understand the difference between a comment and an Answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes the function of a fuse.
nine
One
a photo is worth a thousand words.
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
The other is “what does a “fuse” do?”
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
what exactly is a ‘surge’ protector?
the problem then depends on "how fast does the fuse operate?".
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
He then asserts :
Here is a simplified AC power diagram.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The third is lightning and “how it gets conducted into a home.”
Because the load is inductive, the current lags the voltage.(by a bit).
Upvotes:
Now when you have a certain ac resistance, then a current flows in a loop.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What does a fuse do?
The bolt then partially travels down the line to your home.